Past Project:
Customized Design and Build Ribbon Mixer for Plastic Powder
Product General description
Quantum specializes in the design, manufacture and supply of a range of mixers best suited to your specific mixing and material characteristics. Whether your application is batch mixing or continuous mixing, major, minor and micro additives, liquid to solid, solid to liquid, or liquid additives or de-lumping during mixing, we has vast experience - over 30 years in building mixers to assist you in your suitable mixer selection.
Ribbon blenders are convective mixers. The mixture movement is forced by the rotation of the ribbon which is circulating the product in 2 directions: the ribbon is actually made in 2 parts, 1 external ribbon circulates the product in 1 direction while another ribbon located inside the 1st one moves the product in the other direction (it can be possible to have even more complex profiles to attempt optimizing the mixing efficiency and thus the mixing time). By mixing enough time, those 2 axial movements, coupled with some radial movement (blades "cutting" the material when rotating), will allow reaching the required degree of homogeneity. The twist of the helix must be studied by the manufacturer so that the direction in which the outer ribbons is pushing is towards the outlet valve of the mixer, if it is not the case, good discharging rate of the mixer cannot be achieved.
Specification
Quantum Standard Range
Model | Total Volume (CBM) | Load Factor | Power (KW) | Dimension (mm) | Weight (KG) |
QRM-0.1 | 0.1 | 0.4-0.6 | 3 | 1410X810X759 | 330 |
QRM-0.5 | 0.5 | 0.4-0.6 | 7.5 | 2050x1100x1060 | 980 |
QRM-1.0 | 1 | 0.4-0.6 | 11 | 2580x1250x1310 | 1700 |
QRM-3.0 | 3 | 0.4-0.6 | 18.5 | 3420x1610x1710 | 3000 |
QRM-6.0 | 6 | 0.4-0.6 | 30 | 4210X1920X2100 | 6180 |
QRM-8.0 | 8 | 0.4-0.6 | 37 | 4570X2080x2260 | 8200 |
QRM-10 | 10 | 0.4-0.6 | 45 | 5110x2120x2610 | 8850 |
QRM-12 | 12 | 0.4-0.6 | 45 | 5420x2250x2710 | 9400 |
QRM-15 | 15 | 0.4-0.6 | 55 | 5740x2390x2830 | 10100 |
QRM-20 | 20 | 0.4-0.6 | 55 | 6719x3635x3050 | 10550 |
Features / Benefits
1) Working capacity of 100 liters - 20, 000 liters
2) Available in all grades of stainless steel, carbon steel and special alloy steels.
3) Ribbon agitator for center discharge.
4) Designed for atmospheric operation.
5) Top cover depending on the length of the blender.
6) Centrally located Flush bottom discharge valve.
7) Stuffing boxes with easily disassembled housings. Counter balance seal assembly for main shaft
8) Stainless steel surfaces are polished to desired standards
10) Single Speed Drive.
11) Mounting supports optional providing adequate discharge clearance.
Typical Equipment Photos